Line 6 Catalyst CX-60 60W Combo Amplifier

The Catalyst® CX family comprises three dual-channel combo amplifiers that perform like traditional guitar amps,while providing the increased versatility of modern amplifiers. They feature 12 Amp Voicings derived from the award-winning Helix® amp and effects processor—ranging from pristine clean to modern high-gain—and each Amp Voicing is matched with a custom Boost type. There are also 24 HX®-quality effects spanning four effects categories. Additional features include sturdy construction, a Tap/Tuner button, an XLR line output, an effects loop, a Power Amp input for using Catalyst CX as a powered speaker, MIDI functionality, a 4-channel USB recording interface, and power output options.

Features:

• 12 Amp Voicings ranging from pristine clean to modern high-gain, derived from the Helix amp and effects processor
• Familiar controls with numerous effect and other options available just “under the hood”
• Each Amp Voicing is matched with an optimal Boost type
• Select up to two of 24 Reverb, Delay, Modulation, and Pitch
• Tap in the tempo when using time-based effects or press and momentarily hold the button to access the chromatic tuner
• Connect an LFS2 footswitch (not included) to toggle between channels and turn effects on and off remotely
• Connect Catalyst CX to professional P.A. or recording devices using the XLR line output (with Ground Lift switch)
• Insert external effects and other devices into your signal chain
• Use Catalyst CX as a powered speaker by bypassing the preamp
• Provides half power, 0.5 watts, and speaker Mute options
• Use this to connect to the Catalyst Edit app (Mac®, PC, iOS®, Android™) and to the onboard audio interface, which provides 4 channels (4 in/4 out) at 24-bit, 44.1kHz or 48kHz
• Catalyst 100 and 200 receive Program Change (channel/preset selection) and Continuous Controller messages via 5-pin DIN. Catalyst 60 supports MIDI over USB-B

Specifications:

• Wattage: 60W
• Controls: Boost, Gain, Presence, Channel Volume, Master Volume
• Channels: Two
• Inputs: One - 1/4", One - 3.5mm (Aux In) 
• Speaker Jack: XLR w/ground lift (Direct Out)
• Headphone Out: One - 1/4"
• Power Amp In: 1/4" (via FX Loop Return)
• Effects: 3-Band EQ, 6 types of each Delay, Modulation, Pitch/Filter, and Reverb effects - two different types of effects can be enabled simultaneously and each edited independently
• Speakers: 1x12" custom-voiced
• USB: 4-in/4-out Audio Interface
• MIDI: USB
• Total Impedance:
• Preamp Tubes:
• Power Tubes:
• Rectifier:
• Software: Catalyst Edit - Remote software editor (PC, Mac, iOS, Android)
• Dimensions: 17.5 x 19.8 x 10.3 inches / 444 x 503 x 262 mm
• Weight: 11.8 kg / 25.9 lbs